• Fits most 1987+ center bolt style small block Chevy
• May not work with LT1 engines
• Includes baffles and bolts
• Made out of aluminum
• Smooth black finish with ball milled top
• Short style covers 2 9/16″ in height

The post Center Bolt Valve Covers For SBC 305 5.0L & 350 5.7L – Black Ball Milled appeared first on GoodSpeed USA.

• Correct reproduction for 1959-1967 small block Chevy V8 engines

(perimeter bolt design)

• Also will fit most 1958-1986 Chevy small blocks

(perimeter bolt design)
–
Does not have PCV or breather holes

• Does not include mounting hardware
• Measure 2-1/2″ in height
• Classic “Chevrolet” script
• Made out of steel with a black powder coated finish
• Licensed GM reproduction

The post Black “Chevrolet” Script Steel Valve Covers For Small Block Chevy – No Holes appeared first on GoodSpeed USA.

• Fits 1962-1985 small block Ford 289, 302, 5.0 & 351W
• Made out of aluminum with a polished finish
• Includes mounting hardware
• Valve cover measures about 4″ in height
• Includes breather grommets and mounting hardware

Please note: may have small imperfections and/or polished surface may vary slightly from photos

The post Polished Tall Finned Aluminum Valve Covers 1962-1985 SBF 289, 302, 5.0 & 351W appeared first on GoodSpeed USA.

• Fits big block Ford 429 & 460
• Made out of aluminum with ball milled design
• Black finish
• Includes all hardware shown in photos
• Measure 4-1/2″ tall

Please note: some heads have 3 valve cover bolts across the inside edge and these only have 2, the center bolt isnt required and is optional

The post Pair Black Ball Milled Valve Covers For Big Block Ford BBF 429 & 460 appeared first on GoodSpeed USA.

• Fits 1958-86 Chevy small blocks (perimeter bolt design)
• Includes pair of valve covers with baffles, grommets, and hardware
• Tall style (3-11/16″ in height)
• Each has 1-1/4″ breather hole
• May have small imperfections and/or polished surface may vary slightly from photos

The post Black Aluminum Finned Tall Valve Covers For SBC Small Block Chevy 350 appeared first on GoodSpeed USA.

• Fits 1962-1985 small block Ford 289, 302, 5.0 & 351W
• Made out of aluminum and topped with a black powder coated finish
• Polished fins
• Includes mounting hardware
• Valve cover measures about 4″ in height
• Includes breather grommets and mounting hardware

The post Black Tall Finned Aluminum Valve Covers For 1962-1985 SBF 289, 302, 5.0 & 351W appeared first on GoodSpeed USA.

• Fits 1958-86 Chevy small blocks (perimeter bolt design)
• Includes pair of valve covers with baffles, grommets, and hardware
• Standard height style (tallest point is at center and is 3-1/2″ height including fins)
• Approx 3″ inside height at center and 2-1/2″ inside height at ends
• Each has 1-1/4″ breather hole
• May have small imperfections and/or polished surface may vary slightly from photos

The post Black Aluminum Finned Short Valve Covers For SBC Small Block Chevy 350 appeared first on GoodSpeed USA.

• Fits 1958-86 Chevy Small Blocks (Perimeter bolt design)
• Includes Pair of Valve Covers with Baffles, Grommets, and Hardware
• Tall style (3-11/16″ in height)
• Each has 1-1/4″ breather hole
• May have small imperfections and/or polished surface may vary slightly from photos

The post Polished Aluminum Finned Tall Valve Covers for SBC Small Block Chevy 350 appeared first on GoodSpeed USA.

• Fits 1958-1986 Chevy small blocks (perimeter bolt design)
• Measures 5/16″ thick
• Made out of cork with a steel core
• Sold as a pair

The post Pair 5/16″ Extra Thick Cork Valve Cover Gaskets For Small Block Chevy 350 appeared first on GoodSpeed USA.

• Fits 1958-1986 Chevy small blocks (perimeter bolt design)
• No holes drilled for breathers
• Includes pair of valve covers with hardware
• Tall style (3-11/16″ in height)
• May have small imperfections and/or polished surface may vary slightly from photos

The post Polished Aluminum Finned Tall Valve Covers SBC Small Block Chevy 350 – No Holes appeared first on GoodSpeed USA.

• Fits small block Ford 302

(will NOT fit EFI cars)

• Will clear most roller rocker arms
• PCV grommet and spark plug wire brackets included
• Licensed by Ford
• Made out of high quality 383-3 aluminum alloy and then given a durable powder-coated wrinkled finish
• Includes cadmium plated oil filler tube
• Made in the USA

The post Black Finned Aluminum Valve Covers For SBF Small Block Ford 302 appeared first on GoodSpeed USA.

• Fits most 1987+ center bolt style small block Chevy
• May not work with LT1 engines
• Tall style clears most roller rockers
• Approximately 4-1/2″ in overall height
• Includes PCV grommet and hardware
• May have small imperfections and/or polished surface may vary slightly from photos

The post Black Tall Finned Aluminum Valve Covers For Small Block Chevy 350 Vortec TBI appeared first on GoodSpeed USA.

• Fits 1964-1973 Ford Mustang
• Made for steel or aluminum valve covers with 1-1/4″ hole
• Inside diameter measures 3/4″

The post Twist-On PCV Valve Cover Grommet w/ Notches For 1964-1973 Ford Mustang appeared first on GoodSpeed USA.

• Fits 1958-86 Chevy small blocks (perimeter bolt design)
• Includes pair of valve covers with baffles, grommets, and hardware
• Standard height style (tallest point is at center and is 3-1/2″ height including fins)
• Approx 3″ inside height at center and 2-1/2″ inside height at ends
• Each has 1-1/4″ breather hole
• These valve covers have

no breather holes

• May have small imperfections and/or polished surface may vary slightly from photos

The post Small Block Chevy Polished Aluminum Finned Short Valve Covers 350 SBC W/O Holes appeared first on GoodSpeed USA.

• Fits most 1987+

center bolt
style small block Chevy engines

• May not work with LT1 engines due to altenator placement
• Tall style clears most roller rockers
• Approximately 4-1/2″ in overall height
• Includes pair of valve covers, grommets, and hardware
• May have small imperfections and/or polished surface may vary slightly from photos

The post Finned Aluminum Valve Covers for Small Block Chevy 350 Vortec TBI (Tall) appeared first on GoodSpeed USA.

• Show quality unpolished aluminum
• Fits 1-1/4″ opening with included grommet
• Breather stem measures 3/4″
• 2-3/4″ casting diameter
• Made in the USA

The post Unpolished Finned Aluminum Round Push In Valve Cover Breather For 1-1/4″ Hole appeared first on GoodSpeed USA.

The post Finned Aluminum Round Flathead Rear Breather – Unpolished Show Quality appeared first on GoodSpeed USA.

Oil Fill Tube & Finned Breather Cap 

• Fits vintage engines with a 1 1/4″ diameter hole
• Made in the USA
• The finned cap is made out of aircraft-grade A-365 aluminum
• The tube is made out of steel and topped with a chrome finish
• Unpolished (show quality)
• The cap diameter measures 2 3/4″ inches and the total assembly measures 8 1/2″ in height

The post Oil Fill Tube & Finned Breather Cap For Vintage Engines appeared first on GoodSpeed USA.

Oil Fill Tube & Finned Breather Cap 

• Fits vintage engines with 1 1/4″ diameter hole
• Made in the USA
• Cap is made out of aircraft grade A-365 aluminum
• The tube is made out of steel and topped with a chrome finish
• Cap is highly polished (show quality)
• Cap diameter measures 2 3/4″ inches and the total assembly measures 8 1/2″ in height

The post Oil Fill Tube & Finned Breather Cap For Engines 1-1/4″ Hole – Polished Aluminum appeared first on GoodSpeed USA.

The post Pair Finned Valve Cover Breathers – Side Angled Style Cast Aluminum appeared first on GoodSpeed USA.